设为首页 加入收藏
首页 资讯 vxWorks VMEbus 硬件 开源系统 大杂烩 EBook BBS
我要投稿

TOP

Common Footprint for the MPC750, MPC755,MPC7400, and MPC7410
2011-05-08 21:46:20 来源: 作者: 【 】 浏览:56次 评论:0
This document describes how to design a platform with a common footprint for the MPC750, MPC755, MPC7400, and MPC7410; that is, it is intended to help design a single board compatible with all of these devices. Although this document contains relevant information, it is not intended to be a complete migration guide for moving from G3- to G4-class systems.
As a general note, refer to the appropriate hardware specifications and user’s manual for the specific device under consideration.
For this document, the following system definition is assumed for the MPC750, MPC755, MPC7400 and MPC7410:
• 64-bit data bus mode
• No data retry
• Bus operates in 60x mode
Note that all the CPUs can run in 60x bus, and the MPC7400 and MPC7410 have the ability to run in an enhanced mode MPX.
以下是“技术资料”详细资料
语言: 英文 
作者:  
大小: 0.612 M
下载地址: AN1812  
在线预览:  
您看到此篇文章时的感受是:
Tags:MPC750 MPC755 MPC7400 MPC7410 责任编辑:frank
】【打印繁体】【投稿】【收藏】 【推荐】【举报】【评论】 【关闭】 【返回顶部
上一篇Design Checklist for Freescale .. 下一篇Minimal Boot Sequence for Execu..

评论

帐  号: 密码: (新用户注册)
表  情:
内  容:

相关栏目

最新资料

图片主题

热门资料

推荐资料

相关资料

广告位